Using The Dispensing Tap - Rheem 743 Series Owner's Manual & Installation Instructions

Using the Dispensing Tap
Tap design will depend on model ordered. Regardless of the model, func on is as illustrated below.
Water is delivered on the opera on of the levers:
• The boiling water lever has a RED indicator
• The cold water lever has a BLUE indicator.
Push and hold the lever down
for quick cup fills.
Pull the lever up un l it latches to
allow for hands‐free filling.
Safety Lock
When ac vated, boiling water can only be delivered when the safety bu on is held down while the hot lever is operated.
To ac vate and de‐ac vate the bu on, press and hold it for five seconds. When the safety lock is ac vated, the RED safety
indicators on the safety bu on will be lit.
Tap Indicators
There are two status indicators fi ed adjacent to the levers.
The Green LED (Ready) indicates the status of the Boiling Water Appliance temperature. If the Green LED is flashing, boiling
water is below the set opera ng temperature. When the Green LED is lit and not flashing, the unit is at op mum delivery
temperature. Hot water delivered while the Green LED is flashing may be below op mum.
The Orange LED (Filter), if flashing, indicates the water filter should be replaced. Please refer to page 14 ‐ Filter replacement.
To ac vate safety func on,
push and hold for five seconds un l
the RED safety indicators are lit.
Azure™ tap
Aqua™ tap
13