Setting Length Of Handgrip Arm - LifeWalker Mobility Products Upwalker User Manual

4. To close the UPWalker to its most compact size for storage or
transport, point handgrips directly downward or upward in a vertical
position so they don't conflict when folding (Fig C5 or C3).
Fig C4
D. Setting Length of Handgrip Arm
1. The UPWalker is shipped with the
handgrips set in the extended length
position relative to the armrest pads.
This default length should fit most
users.
2. Should the user want to shorten the
reach from the armrest pads to the
handgrips, first release the chrome cam
lever under the armrest pad (Fig D1).
3. Swivel the handgrip arm inward to
access the brass pin (Fig D2) in the slot
under the armrest pad, depress the pin
and pull the handgrip backward until
the second (originally unexposed) pin
locks in the slot (Fig D3). Return
handgrip to desired angle and close the
cam lever (Fig C6).
4. Repeat on both sides so the reach is
uniform left and right.
Fig C5 Fig C6
Fig D1
Fig D2
Fig D3
9