Related Manuals for LifeWalker Mobility Products UPWalker Lite i100
Summary of Contents for LifeWalker Mobility Products UPWalker Lite i100
- Page 1 U S E R G U I D E MODEL # i100 REV. 3/19 UPWalker Lite is produced by LifeWalker, a leader in upright mobility.
-
Page 2: Safety Warnings
Safety Warnings TO ENSURE YOUR SAFETY IN USING THE UPWALKER LITE, THE ® FOLLOWING SAFETY INFORMATION AND ALL INSTRUCTIONS MUST BE FOLLOWED. • DO NOT use this product without first reading and understanding the instructions contained in this booklet. • DO NOT exceed 300lb (136kg) weight limit. - Page 3 UPWalker Lite Product Features 1. Handgrip 8. Brake adjustment knob 2. Parking/hand brake 9. Front wheel 3. Armrest pad 10. Seat 4. Height adjustment tube 11. Seat rail 5. Height adjustment lock 12. Backrest 6. Sit-to-stand handles 13. Personal item bag 7.
- Page 4 Opening the UPWalker Lite Place the UPWalker Lite on all four wheels on a level floor (Figure 1). Standing behind the unit, hold each sit-to-stand assist handle and move outward in opposite directions to open frame (Figure 2). Complete the process by pushing downward on the seat until the seat rails sit securely on the frame (Figure 3).
-
Page 5: Armrest Height Adjustment
Armrest Height Adjustment Push in the upper portion of the light gray height adjustment tab (Figure 4) and, while keeping the tab depressed with one hand, use your other hand centered over the armrest pad to raise or lower the armrest to the desired height (Figure 5). When the armrest is at the desired height, release the height adjustment tab to lock the armrest in place. - Page 6 Attaching / Removing the Personal Item Bag The personal item bag has plastic clips which go over the seat rail extension on the front end of the walker (located at front end of the seat). With the UPWalker logo side of the bag facing toward the front, slide the clips over the right and left seat rail extensions (Figures 6-7).
- Page 7 Attaching / Removing the Beverage Holder The beverage holder can be attached to either one of the handgrip tubes. First, unscrew the knob on U-shaped tube clamp and remove the beverage holder from the U-clamp. Then slide “U” over handgrip tube close to armrest pad with hole on bottom and flat side of “U”...
-
Page 8: Adjusting Brakes
Using Brakes / Parking Brakes To apply the brakes while walking with the UPWalker Lite, pull both brake handles evenly toward you (Figure 12). To set the parking brakes, while using one hand to hold the handgrip use the other hand to push the brake handle forward until it clicks in locked position (Figure 13). - Page 9 Adjusting Brakes (contd.) Advanced Adjustments: If this adjustment does not achieve the desired braking strength, use the adjustment option on the brake handle end of the brake cable (Figure 16). If the brakes are too loose, use your fingers or pliers to turn the barrel adjuster nut counterclockwise a half rotation at a time until the brake functions...
- Page 10 Sitting and Using Sit-to-Stand Handles To sit on the seat, set the parking brakes with the UPWalker Lite positioned on a level surface. Sit with legs facing the rear using the sit-to-stand handles for assistance and backrest for support. You may sit with the armrests in either a raised or lowered position depending on your preference.
-
Page 11: Folding And Transporting
Warranty Information LifeWalker Mobility Products stands firmly behind our commitment to provide premium quality products. Our standard warranties represent our confidence in the materials and workmanship of your new UPWalker Lite. The... -
Page 12: Customer Support
• The date of your purchase and form of payment. • The product serial number. • A description of the defect or problem requiring service. DO NOT return any products to LifeWalker Mobility Products without our prior authorization. If you purchased your UPWalker Lite from an authorized LifeWalker Mobility Products dealer, please contact that dealer.