Using Your Upwalker; Maintenance - LifeWalker Mobility Products Upwalker User Manual

K. Using Your UPWalker
1. Once standing in the UPWalker move forward so your body is between
the armrest pads, standing in an upright position with good posture.
2. Put equal arm pressure on the left and right armrest pads. Put hands on
handgrips with fingers around the brake handles. Take full-stride steps
with constant gait.
3. Pull on brake handles while going down hills to control speed.
4. Walk regularly for exercise to maintain good health.
L. Maintenance
1. Check your UPWalker periodically to make sure that the brakes are
working correctly and that all of the nuts and bolts are secure. Do not use
the UPWalker if the brakes are not working correctly.
2. If handgrips are loose, do not use the UPWalker.
3. Periodically inspect the wheels for tightness, wear and damage. Before
use, make sure that the wheels are free of hair, lint, dirt and other debris.
4. Regular inspection of parts including hardware, brackets and plastics
for deformation, corrosion, breakage, wear, dents or compression is
highly recommended.
5. Regular cleaning of the UPWalker is recommended. Wipe all surfaces
with a damp cloth and allow the surfaces to dry before use.
6. UPWalker foam handles and pads are made of closed cell material so
they can be sanitized with antiseptic cleansers.
7. Teflon or silicone lubricant may be applied to a rag and run over the
armrest height adjustment tubes and seat rail slide, after cleaning, to
assure smooth operation.
14