Set-Up Instructions - LifeWalker Mobility Products Upwalker User Manual

SET-UP INSTRUCTIONS

1. Unbox the UPWalker on a level floor. Carefully remove the UPWalker
from the box and remove protective plastic and all cardboard pieces.
Retain shipping materials in the event of customer return of product.
2. Stand the UPWalker up on all four wheels (see Fig A1 on page 6).
3. Push the front wheel gray lock tabs down to release the front wheels
from locked position (see "Locking and Unlocking Wheels" on page 13).
4. The rear wheels will automatically lock in place when turned backward
(see "Locking and Unlocking Wheels" on page 13).
5. Open the UPWalker (refer to "Opening the UPWalker" on page 6).
6. Adjust armrest height to your desired user height (refer to "Setting
Desired Armrest Height" on page 7).
7. Set handgrip orientation to your desired angle (refer to "Setting
Handgrip Angle" on page 8).
8. Set handgrip extension to your desired length, or leave in current
position if comfortable (refer to "Setting Length of Handgrip Arm"
on page 9).
9. Check the brakes for normal function, including the parking brake
function (refer to "How to Adjust Brakes" on page 10).
10. With parking brakes off (see "How to Use Parking Brakes" on page 10),
ensure that all four wheels spin freely.
11. Follow instructions on page 6 for securing seat in forward position, with
seat rails pushed firmly inside support brackets on frame, before using
the UPWalker.
12. Examine all other parts for shipping damage. DO NOT use the UPWalker
if there is apparent damage or if any parts (other than accessories) are
missing. If there are missing or damaged parts, please contact
LifeWalker Customer Service at 866-588-1845 or
customerservice@lifewalkermobility.com.
4