Positioning The Seat; Using Sit-To-Stand Assist Handles - LifeWalker Mobility Products Upwalker User Manual

at 866-588-1845 or customerservice@lifewalkermobility.com. Please note,
LifeWalker does not reimburse customers for maintenance charges on the
UPWalker, including brake adjustments.
G. Positioning the Seat
1. To walk in the UPWalker, pull the seat to the most forward position by
lifting up and pulling forward the tab on the front of the seat (Fig G1).
2. To sit on the seat, set the parking brake, pull the seat fully backward
using the rear pull tab (Fig G2), and sit with legs facing the rear. Sitting on
the seat with the armrests in their raised position is often preferred.
3. Use the sit-to-stand assist handles as needed when sitting and
standing (Fig G3).
Fig G1
H. Using Sit-to-Stand Assist Handles
1. Move rear wheels of the UPWalker under the chair in which you are
seated, aligned with your feet.
2. Set parking brakes (see "How to Use
Parking Brakes" on page 10).
3. Place hands on left and right sit-to-stand
assist handles.
4. Bend over to where your nose is over your toes and push down on the
sit-to-stand assist handles to stand up into the UPWalker (Fig H1).
5. Release parking brake (see "How to Use Parking Brakes" on page 10)
12
Fig G2
Fig G3
Fig H1