Computer Input; Input Source Selection - Sanyo PLC-SW30 Owner's Manual

Computer Input

Input Source Selection

Direct Operation
Choose Computer by pressing INPUT button on the top control or
COMPUTER button on the remote control.
Before using these buttons, correct input source should be selected
through menu operation as described below.
Menu Operation
1 Press the MENU button to display the On-Screen Menu. Press
Point 7 8 buttons to move the red frame pointer to INPUT
Menu icon.
2
Press Point d
Computer and then press SELECT button. The Source Select
Menu will appear.
3
Move the pointer to the correct input source and press SELECT
button.
When the input source is coming from a computer
RGB
through the COMPUTER IN / COMPONENT IN
terminal, select RGB.
☞
Component
21-pin ) " P31.
☞
RGB (Scart)
21-pin ) " P31.
22
button to move the red arrow pointer to
" Selecting Input Source (Component / RGB-Scart
" Selecting Input Source (Component / RGB-Scart
INPUT button
Computer
Video
Input Menu icon
INPUT MENU
Move the pointer (red
arrow) to Computer and
press SELECT button.
Source Select Menu
Move the pointer to RGB and
press the SELECT button.