Terminals - Sanyo PLC-SW30 Owner's Manual

Overview

Terminals

q VIDEO
Connect the composite video output from video
☞
equipment. ( P16 )
w S-VIDEO
Connect S-video output from video equipment. (
e SERVICE PORT
This jack is used to service this projector.
r USB
Connect the USB port of your computer to this port
when you wish to use the PAGE
remote control to scroll back and forth pages on the
screen of the connected computer.
10
✽ w
q
RESET
VIDEO
S-VIDEO
COMPUTER IN /
COMPONENT IN /
AUDIO IN
COMPUTER /
AV
COMPONENT
u y
t
t AUDIO IN AV
y AUDIO IN COMPUTER/ COMPONENT
☞
P16 )
u COMPUTER IN / COMPONENT IN
ed buttons on the ✽ RESET button
☞
P15, P38 )
(
e
SERVICE PORT
USB
r
Connect audio output from video equipment. (
Connect audio output from a computer or component to
☞
this jack. ( P15, P16 )
Connect computer output, component output or
Scart 21-pin video output to this connector. (
P16 )
A microprocessor included in the projector may occasionally
malfunction and need to be reset. If necessary, press this
button with a sharp tool to restart the unit. Do not use it
excessively.
☞
P16 )
RGB
☞
P15,