Image Level Adjustment - Sanyo PLC-SW30 Owner's Manual

Computer Input

Image Level Adjustment

1 Press MENU button to display the On-Screen Menu. Press
Point 7 8 buttons to move the red frame pointer to Image
Adjust Menu icon.
2 Press Point d
that you want to adjust. and then press SELECT button. The
level of each item is displayed. Adjust each level by pressing
Point 7 8 buttons.
Contrast
Press Point buttons to adjust the image contrast. (From 0 to 63.)
7 8
Brightness
Press Point buttons to adjust the image brightness. (From 0 to 63.)
7 8
Color temp.
Press Point 7 8 buttons to select the Color temp. level that you
want to select. (XLow, Low, Mid, or High)
White balance (Red)
Press Point buttons to adjust the red tone. (From 0 to 63.)
7 8
White balance (Green)
Press Point 7 8 buttons to adjust the green tone. (From 0 to 63.)
White balance (Blue)
Press Point 7 8 buttons to lighten the blue tone. (From 0 to 63.)
Gamma
Press Point buttons to obtain better balance of contrast. (From 0
7 8
to 15.)
Auto grayscale
When this function is "ON", it automatically enhances contrast of
bright and dark part of image.
Reset
Reset all adjustment to previous figure.
Store
To store manually preset image, move the red frame pointer to Store
icon and press SELECT button. The Image Level Menu will appear.
Move the red frame pointer to the Image 1 to 4 where you want to
set and then press SELECT button.
Quit
Closes Image Menu.
28
button to move the red frame pointer to the item
IMAGE ADJUST MENU
Move the red frame pointer to
the item to be selected and
then press SELECT button.
Selected Image level
Press Point
adjust value.
Store icon
Press SELECT button at this icon to
store the adjustment.
Image Level Menu
Move the red frame
pointer to any of
Image 1 to 4 where
you want to set and
then press SELECT
button.
Image Adjust
Menu icon
7 8 buttons to