Table of Contents
Advertisement
Appendix (Continued)
b b b b Special Code Chart
These functions can be loaded by entering their special codes.
b b b b ERNITEC SATURN
Code
AUTOPAN
301
Saves the current position of the first limit switch.
302
Saves the current position of the second limit switch.
XXX
XXX= 0 – 255: Auto-pan speed (0=min, 255=max)
Note: Cannot use with Saturn type.
PATROL
1000
Deletes patrol order.
1XXX
XXX= 1– 128: Writes preset position "XXX" into patrol order.
2000
Makes patrol order valid.
X= 001 – 128: Deletes preset position "XXX" from patrol order.
2XXX
3XXX
X= 000 – 255: Waiting time (in seconds) upon reaching specified position
Example:
"1000" Deletes previously defined order.
"1001" Writes preset position "1" into order.
"1005" Writes preset position "5" into order.
"1006" Writes preset position "6" into order.
"2005" Deletes preset position "5".
OTHER FUNCTIONS
4XXY
Dome cameras can be set to automatically move to the "return position" after a
set stopping time passes.
XX= 01 – 99: "Return position" (Cannot select positions No. 100 to No. 128)
Y= 0 – 9: Return time
0: 10 seconds, 1: 20 seconds, 2: 30 seconds, 3: 40 seconds, 4: 1 minute,
5: 2 minutes, 6: 5 minutes, 7: 10 minutes, 8: 20 minutes, 9: 40 minutes
4000
Invalidates movement to "return position".
Example:
"4216": After stopping for 5 minutes (Y=6), move to position 21 (XX=21).
400
Text display/non-display (switch)
500
Backlight compensation ON/OFF (switch)
9999
Initializes the dome camera internal memory.
89
Others
ERNITEC SATURN............................................ 89
MARK MERCER ................................................ 90
PELCO .............................................................. 92
SENSORMATIC ................................................. 94
Function
Advertisement
Table of Contents
