Table of Contents
Advertisement
Password Setup (PASSWORD)
Passwords can be set for operations upon unit power ON, setup menu access, etc.
• Write down each password to
remember them. Also, periodic
password changes are recommended
for safety.
• When purchased, the password is set
to "00000". When no password is
required, set it as "00000".
• When the unit is initialized, all
passwords become "00000".
Password required upon power ON
Password required upon alarm reset
ent
Password required upon accessing setup
menu
Password required to enter Graphics
Environment Setup Level 1
Password required to enter Graphics
Environment Setup Level 2
Password required to enter Graphics
Environment Setup Level 3
• When a password is set, an entry
screen will appear, requesting your
password (example: upon power ON).
Enter the password that is set.
• When the wrong password is entered,
"Password not enabled" is displayed.
Enter the correct password.
.
0
enter
.
0
enter
.
0
enter
.
0
enter
.
0
enter
.
0
enter
System Setup
50
Advertisement
Table of Contents
