Communication Setup; Select A Communication Item (Communications) - Sanyo VSP-9000 Instruction Manual

Communication Setup

This sets up communication with equipment connected to the video communication
terminal (VIDEO) or camera communication terminals (TELEMETRY A/B). Serial
communication testing between connected equipment is also available.
b b b b Select a communication item
(COMMUNICATIONS)
Press the button or
select a setup item, then press the
button.
Displays the selected screen. See the
selection item (A B C).
43
System Setup
A
B
C
ent
button to
ent
Selection Items
A 1–VIDEO (Video Equipment
Communication Setup)
Upon purchasing, the communication settings
are set for connecting to our video equipment
(DVR/MUX), and the settings do not need to
be changed.
For communication setup for competitor video
equipment, see the "Communications Chart".
(P86)
• Type:
This displays the equipment (DVR/MUX)
connected to the video communication
terminal. Changing the type will require
changing the Protocol and Baudrate as
well.
• Protocol:
This shows the communication protocol
(SANYO DVR/MU) used on this unit.
• Baudrate:
Select the data transmissions speed
(19200) for the connected video equipment.
• Keyboard Add:
This is the unit address.
esc
ent