Sanyo VSP-9000 Instruction Manual page 49

Control Setup
Single row clear button
Clears a row at a time.
Individual camera setup button
ent
The ten cameras on the cursor line
can be set (A/B/m) individually.
A line selection button
T E L
When pressed, the A/B line switch
button switches to the
B line selection button
T E L
When pressed, the A/B line switch
button switches to the
Address –10 button
-
10
The address of connected video
DVR-MUX
equipment (Dvr/Mux) is shifted
downward in increments of 10.
Address –1 button
-
1
The address of connected video
DVR-MUX
equipment (Dvr/Mux) is shifted
downward in increments of 1.
Address +1 button
DVR-MUX
+
1
The address of connected video
equipment (Dvr/Mux) is shifted
upward in increments of 1.
Address +10 button
DVR-MUX
+
10
The address of connected video
equipment (Dvr/Mux) is shifted
upward in increments of 10.
esc
-
10
DVR-MUX
-
1
DVR-MUX
DVR-MUX
+
1
DVR-MUX
T E L T E L ent
+
10
button.
button.
B 2–MONITOR/LOCAL DVR-MUX
(Valid/Invalid setup for hard disk
digital recorder with multiplexer
function)
Set the addresses of connected video
equipment.
Clear button
Invalidates all video equipment.
All valid button
Validates all video equipment.
Single row switch button
Sets a row to be valid.
Single row invalidate button
Sets a row to be invalid.
Individual setup button
ent
The ten video equipment units on the
cursor line can be set (a/m)
individually.
System Setup
esc
ent
esc
ent
48