System Information - Sanyo VSP-9000 Instruction Manual

System Information

Press the button to display the current initial settings information for this unit. These
settings change when communication line settings have been changed in System Setup.
ALARM PLAY ALARM REC
PLAY PLAY
R PLAY SPEED SPEED REC STOP
CLOCK
TIMER
STILL PLAY STOP ADJUST
ON/OFF
1 Status of selected equipment
(UNDER SELECTION)
• Present camera (00001)
Currently selected camera channel
• Camera address (00001)
Currently selected camera address
• Monitor/Unit (00001)
Currently selected video equipment (DVR/
MUX) address
• A/B/V line (V)
Currently selected line (displayed line sends
command to camera)
2 Communication status for
video equipment or camera
(TELEMETRY)
Displays the communication settings set in
"2–TELEMETRY". (P45)
SYSTEM
SETUP
MAP
ENTER
DVR
ADDRESS ?
1
2
3
esc
3 Communication status for
video equipment (VIDEO)
Displays the communication settings set in
"1–VIDEO" and the address for this unit. (P44)
• Address for this unit (Keyboard Add): 00001
(P44)
4 Returns to Main Menu.
5 Displays system installer
information.
4
esc
i
5
SERVICE
esc
12
Preparation