FILE NO. SERVICE MANUAL VSP-3000 System Controller (Product Code : 117 523 64) (U.S.A., Canada, Brazil) SPECIFICATIONS (Europe, U.K.,Asia, Africa) Communication formar : RS485, RS-422 (Otheania) Keyboard : 29 keys (General) Joystick : Three-axis joystick (pan/ tilt/ zoom) Control communication terminal : Tx1, Tx2, Tx3, TRx...
WARNING Do not use solder containing lead. Note: This product has been manufactured using lead-free If replacing existing solder containing lead with lead-free solder in order to help preserve the environment. solder in the soldered parts of products that have been manufactured up until now, remove all of the existing solder Because of this, be sure to use lead-free solder when at those parts before applying the lead-free solder.
1. DISASSEMBLY 1-1. REMOVAL OF LOWER CASE (CASE BOTTOM) AND JOY STICK 1. Screw 3 x 6 2. Battery cover (Cover battery) 3. Battery DC9V 4. Rubber foot 5. Five screws 3 x 10 6. Battery cable connector 7. Screw 3 x 10 8.
1-2. REMOVAL OF UPPER CASE (CASE TOP) AND PCB ASSY MAIN 1. LCD cable 2. Four screws 3 x 10 3. Two screws 3 x 6 4. LCD module 5. Upper case (Case top) 6. Key rubber (Rubber keypad) 7. PCB assy MAIN 1-3.
2. BASIC SETTING FOR JOYSTICK After assembling the product, it has to be set below (especially, the AS of Main Board or Joystick) 2-1. JOYSTICK CALIBRATION: Push No.3 + SUB MENU (3 sec), the it move to JOYSTICK CALIBRATION MODE Joystick setting point Method PTZ OFFSET...
WNSAS-02 ASSY LCD MODULE Chinese (Simplified),Japanese (INCLUDE METAL PLATE AND SCREWS) WNSAS-06 AKZ1550-8P TERMINAL WNSAS-03 ASSY CASE TOP WTX-1200 (SANYO) WNSAS-07 ADAPTOR 100V~240V (SANYO) SA06L1113 (INCLUDE SCREWS, RUBBER FOOT) 12V/1.25A WINDOW WTX-1200 SANYO (INCLUDING 3 KINDS OF POWER CODE) CASE BOTTOM WTX-1200 (SANYO)
SANYO Electric Co., Ltd. Osaka, Japan Apr./’08...