Table of Contents
Advertisement
Part Names
Rear
1 Power terminal
Connect the DC terminal on the AC adapter
provided.
2 Dipswitch (SW)
Used for PC settings, communication settings,
or terminate settings on this unit.
When using as a system
controller, set to this position.
SW
(OFF)
Use for ON/OFF settings for
1 2 3 4
each terminate setup.
ON
When using the provided PC
software. (ON: P60)
3 PC connection terminal
(COM: RS-232C)
Use for connecting to a PC.
Install software on the provided CD-ROM to a
connected PC to add other languages, etc.
Use the language selection in system setup to
select an added language. This changes the
menu display language.
B Signal
SW
COM
1 2 3 4
ON
12V
1
2
3
4 Camera communication
terminal (TELEMETRY A/B)
Connect a provided or separately purchased
modular cable to this terminal.
• Terminal A: Connect a camera.
• Terminal B: Connect a camera.
5 Video communication terminal
(VIDEO)
Connect video equipment (multiplexer, hard
disk digital recorder, etc.)
When connecting this unit with video
equipment, always use the provided modular
cable and communication conversion
connector.
RS485 (RJ-11) Terminal
A Signal
A
TELEMETRY
B
VIDEO
4 5
Preparation
10
Advertisement
Table of Contents
