Advertisement
the clutch withdrawal mechanism through a Bowden
cable. the actuating Ievur at the other end of the
cable being seen in Fig. 4
When the clutch lever is pulle'l up as far as it will
go towards the handlebar, the drive is disconnected
between the engine and the rear wheel. The lever is
locked in this position by a ratchet E, Fig. 3.
To
engage the clutch it is only necessary to disengage
the ratchet by pressing it inwards, and then release
the clutch lever.
This must be done gradually in
order to ensure smooth engagement.
Brake.
The rear brake control lever is mounted under
the fight handlebar and operates through a Bowden
cable. the actuating lever at the other end being
seen in Fig. 5.
In common with all handlebar
controlled brakes the
large external
expanding
Fig. 5.
Brake cable adjustment
ll
Advertisement
