Sanyo POA-MD13NET2 Owner's Manual page 86

Network board for hd series
Hide thumbs Also See for POA-MD13NET2:
Table of Contents

Advertisement

Chapter 7 Appendix
What are the rules for IP address assignment?
Q
If the network is constructed with TCP/IP protocol, a unique IP address is
A
required for each piece of network equipment. The following are basic rules of
the assignment.
Rule1
Rule2
Rule3
What is the MAC address assigned to the Network Board?
Q
The MAC address is indicated on the case back as the below.
A
MAC address
86
Do not configure the same IP address to the network equipment in
the same network group. Each piece of equipment must be
assigned a unique IP address.
If the IP address is set [192.168.x.x], the Subnet Mask should be
set [255.255.255.0] for example.
The start address [xxx.xxx.xxx.0] and the last address
[xxx.xxx.xxx.255] of the IP address must not be assigned to any
other equipment. These address numbers are reserved.
The IP address must correlate to a network number. If network
numbers are different between the equipment, they cannot estab-
lish communications each other. In this case, the router is placed in
the networks to make the routing.

Advertisement

Table of Contents
loading

Table of Contents