Power On/Off The Projector - Sanyo POA-MD13NET2 Owner's Manual

Chapter 4 Controlling the Projector
This chapter describes controlling the projector via a network using this product.
Display the main menu following to the login procedure described on page 22.

Power on/off the projector

Click Power & Status on the main menu. The control page will be displayed.
By clicking On or Standby button on the page, the power of the projector
can be controlled. When you click Standby button, another confirmation popup win-
dow* will appear, and then click OK button if it is set to standby.
1
The projector is not turned on for about 90 seconds after switching into the standby mode.
After the power status indicator on the control page changes from "On Cooling down" to
"OFF", then try to turn on the projector with
The web browser checks and updates the projector's condition every 20 seconds automatically.
34
Popup confirmation window
On
button.