Image - Sanyo POA-MD13NET2 Owner's Manual

Image

This function is to adjust the projected picture image and set the image
mode. For selection of image mode, select a desired image mode with the
Image pull-down menu button and then click Set button. The setting items
are switched automatically according to selected input mode, computer or video
input. To change the setting of each page, click Set button on each page. When click-
ing Reset button, all of the contents of the pages are reset.
z
x
c
Item Description
Original Mode ........Displays which predefined
image adjustment mode is
based upon.
Image ..................Selects image mode among
the Standard(AV), Cinema*
Standard(PC), Real*
to Image10 with pull-down but-
ton menu . Image1 to 10 are
user preset mode.
Adjustment
items ..................
Contrast, Brightness, Color, Tint
*1 This item is only available in the computer input mode.
*2 This item is only available in the video input mode.
Item Description
White Balance
Color Temp. ......Sets a color temperature mode.
Red, green,
Blue ................Adjusts a white balance
respectively.
Sharpness..........Adjusts picture sharpness.
Detail Enhance* ..Adjusts the detail of the picture.
Gamma ..............Adjusts brightness of darker
part of the picture.
* This item is only available when the optional
board "Faroudja" is installed on the projector.
Item Description
Noise
Reduction ..........Switches noise reduction on/off.
Progressive ............Switches progressive mode.
Auto Picture
Control ................Adjusts picture quality automatically.
Auto Lamp
Control ..............Adjusts lamp brightness auto-
matically according to the pro-
jecting image.
Save Adjustment ....Select a mode to store the
image adjustment values.
OWNER'S MANUAL [HD Series]
Control the projector
,
2
, Image1
1
41
Network Board