Daikin RZQ Series FCQ20EVA Service Manual page 27

SiME281501E
3.1.2 Service Setting
Unit No.
Second
Code No.
First
Code No.
1 2 6
1. Enter the field setting mode.
Press the INSPECTION/TEST operation button for 4 seconds or more.
2. Enter the maintenance mode.
After having entered the field setting mode, press the INSPECTION/TEST operation button for a minimum
of 4 seconds.
3. Select the mode No.
Set the desired mode No. with the up/down temperature setting button.
4. Select the unit No.
Select the indoor unit No. set with the time mode START/STOP button.
5. Carry out the necessary settings for each mode. (Only mode 43 possible for wireless remote controller)
• In case of Mode 43
Press timer ON/OFF button to decide the forced Fan ON.
• In case of Mode 44
Set "Fan speed" with fan speed control button and "Airflow direction" with airflow direction adjusting
button, then press timer ON/OFF button to decide.
• In case of Mode 45
Select the changed unit No. with "
6. Return to the normal operation mode.
Press the INSPECTION/TEST operation button once.
Mode No. Function
43 Forced Fan ON
44 Individual Setting Sets fan speed and airflow direction for
45 Unit No. Change Changes unit No.
Remote Controller
3
4
5
3
5
Content and Operation Method
Turns the fan ON for each unit
individually.
each unit individually when using group
control.
Settings are made using the "airflow
direction adjust" and "fan speed adjust"
buttons.
Set the unit No. after changing with the
programming time up-down button.
Mode No.
Field
Setting
Mode
" or " " button, then press timer ON/OFF button to decide.
Mode No.
Field Setting Mode
5
5
Second Code No.
First Code No.
3
1, 2, 6
Example of Remote Controller Display
UNIT No.
SETTING
Fan
1 : Low
speed
3 : High
Airflow direction
UNIT No.
CODE
SETTING
Field setting No.
No. after change
UNIT No.
CODE
SETTING
Service Mode
0: Upper
4: Lowest
18