Metra Electronics CS-HDMW User Manual

Hdmi wireless extender

Advertisement

Quick Links

HDMI
®
Wireless Extender
CS-HDMW
--

• Important safety notice

Please read below safety instructions carefully before installation and
operation:
1. Please pay attention to all the warnings on this device.
2. Do not expose this unit to rain, moisture and liquid.
3.
Do not put anything into the device.
User manual
4.
Do not repair the device or open the enclosure.
5. Make sure to have proper ventilation.
6. Shut off power and make sure environment is safe before installation.
7.
Do not plug-in/out the network cables and IR cables when it is in use
User Manual
to ave id damage.
8. Use DCSV only. Make sure the specification matched if using 3
DC adapters.

Introduction

This transmitter extends HDMI signal wirelessly from source device to
display device up to 200 meters with the advanced application of IP
transport protocol and wireless technology. It requires no cables
between sender (TX) and receiver (RX) which makes the installation
easy and clean.
Note:
1) Transmission distance will be different due to the environment.
2)
Wall, brick or glass will shorten the signal cover range or cause big
signal loss.

Features

1. Transmit HDMI signal from source device to display device up to
200meters wirelessly.
2. Support IR remote control function to control source device content
from long distance.
3. No cable between sender(TX) and receiver(RX).
4.
Easy and clean installation.

• Package contents

HDMI Extender TX
HDMI Exlender RX
sender'lpcs
recelver*lpcs
party
..i
IR blaster extension
IR receiver extension
cable*lpcs
cable•lpcs

• Installation Requirement

1. HDMI source device.
2.
HDMI display device.

Panel description

1. HDMI Extender TX sender
c-
J (
�-@�
-� J �
- ® �
L
l
DCSV/2A power
adapter*2pcs
User manual*lpcs
Oj
lJG Iii
0.
!
I I I
I
® @ 0
@

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CS-HDMW and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Metra Electronics CS-HDMW

  • Page 1 6. Shut off power and make sure environment is safe before installation. sender'lpcs recelver*lpcs adapter*2pcs Do not plug-in/out the network cables and IR cables when it is in use CS-HDMW User Manual to ave id damage. 8. Use DCSV only. Make sure the specification matched if using 3 party DC adapters.
  • Page 2 Q: Display not fluent and stable? (!) Power led It lights when power is on • Connection A: l) Please move the position of sender (TX) and receiver (RX) and make sure the device is within the required signal range. ®...

Table of Contents