Metra Electronics CS-HDIPEXTSR User Manual

HDMI ® Over IP Extender
User Manual
CS-HDIPEXTSR

• INTRODUCTION

H DMI over IP extender, takes the advantages of the latest transmission
technology - and extends your HDMI video/audio with the resolution of
lOBOp 60Hz up to l20m(394 feet) via single network cable. Supports IR
signal, to control the signal source device.

Important Safety instructions:

1. Do not mix up the HDMIEXTENDERTX and HDMI EXTENDER RX,
and the IR blaster and IR receiver.
2. Do not plug-in/out the cables ,when it is powered up.
3. Use DC SV power supply only. Make sure the specification matched if
using 3rd party DC adapters.

• Package Contents

@�
.
•
0 0
HDMI EXTENDER HDMI EXTENDER
sander TX xlpa recelvar Rx xlpcs
-====
�
�
DCSV/IA x2pcs IR blaster IO>ltension
coble xlpcs
Note: Above contents is regular package for a kit. If purchasing HDMI extender
RX separately, the package contents would be different.

• Installation Requirements

1. HD Ml source device.
2. HDMI display device with HDM[ input.
3. Network cables : UTP/STP Cat5e/6 network cables, which following
the standard of!EEE-5688.
Transmission length: CATS 80m/CATSE 100m/CAT6 120m.

• Panel Description

1. HDMI EXTENDER TX [S.nder)
@ @
@Reset
@ HDMisignal input
© IR signal output to connect
.;.:i-•�
'u_")� with blaster extension cable
©
Power input ( DC5V J
User Manual xlpcs
2. HDMI EXTENDER RX(Receiver)
==C)ImJ=
i1•1t
@lm==
IR receiver extension
@ @
cablexlpts
@Reset
@ HDMisignal output
© IR signal input to connect with
IR receiver extension cable
© Power input ( DC5V J
·-.,
©©
®0@
© Power Light
© IP signal output
0 Data transmission light
@ Network link light
©©
®0@
©
© Power Light
@ IP signal input
0 Data transmission light
@ Network link light