Bomag BW 100 AD-4 Operating Instructions Manual page 6

Table of Contents
6.10 Check the coolant level
6.11 Check the water separator
6.12 Checking the water level
6.13 Checking the emulsion level
6.14 Checking the chip spreader and cleaning the spreading beam
Every 50 operating hours
6.15 Checking fuel lines and clamps
6.16 Servicing the chip spreader
Every 250 operating hours
6.17 Changing engine oil and oil filter
6.18 Checking, cleaning, replacing the combustion air filter
6.19 Check the air intake lines
6.20 Cleaning radiator and hydraulic oil cooler
6.21 Checking, tensioning, replacing the V-belt
6.22 Checking radiator hoses and hose clamps
6.23 Checking, adjusting the scrapers
Every 500 operating hours
6.24 Battery service
6.25 Change the fuel filter
6.26 Drain the fuel tank sludge
Every 1000 operating hours
6.27 Checking, adjusting the valve clearance
6.28 Check the engine mounts
Every 2000 operating hours
6.29 Changing hydraulic oil and breather filter
6.30 Changing the hydraulic oil filter
6.31 Changing the coolant
6.32 Replacing the fuel lines
6.33 Check the injection valves
Every 3000 operating hours
6.34 Checking the fuel injection pump
As required
6.35 Checking the tire pressure
6.36 Cleaning the water sprinkler system
6.37 Draining the water sprinkler system, maintenance in case of frost
6.38 Filling the provision tank for the windscreen washer system
6.39 Tightening torques for screws with metric unified thread
6.40 Engine conservation
6 BOMAG
83
84
84
85
85
87
87
87
89
89
91
94
95
96
96
97
99
99
100
101
103
103
104
105
105
106
107
109
109
111
111
113
113
113
115
116
116
117
BW 100/120/125 AD-4/AC-4