Advertisement
• Place the electronic unit back onto the bracket, allowing
it to latch into place.
• Screw the cover back onto the unit.
Make sure that the LED opening on the
cover is positioned over the LED on the
electronic unit.
Never recharge standard batteries.
Doing so will present a risk of ex-
plosion. Do not throw the batteries
into a fire. Do not short-circuit bat-
teries.
7.1. Teaching in on the MAX! system with the
MAX! cube
• Start the local MAX! software.
• Click „New device".
• Then press and hold down the
teach-in button on the MAX! win-
dow sensor.
• In the software, click „Next" to assign
a name for the device and allocate
it to a room.
• Successful teaching in of the MAX!
window sensor is confirmed by the
LED lighting up once.
• Finally, place the cap on the electronic unit.
22
7. Teach-in:
4
Advertisement
Chapters
