eQ-3 MAX! Radiator Thermostat+ Operating Manual page 112

Screw method:
Screw fastening damages the window frame. For
those living in rented accommodation, this could lead
to a landlord making a claim for compensation or hol-
ding back a tenant's deposit.
• Use a pen to mark the bore hole positions (a) of the elec-
tronic unit (1) and the magnet holder (2) on the window
frame and casement.
1)
a)
a)
• If you are working with a hard surface, you should pre-
drill the holes marked (a) using a 1.5 mm drill.
• Use the countersunk head screws supplied to fasten the
wall brackets for the electronic unit (1) and magnet (2).
If you are using the 14.5 mm high spacer, you must
first fasten it with two 2.2 x 16 mm screws and then
attach the magnet unit (2) to it with another two
screws. The flatter spacers are simply fastened to-
gether with the magnet using two 2.2 x 16 mm screws.
20
2)
a)
a)