eQ-3 MAX! Radiator Thermostat+ Operating Manual page 72

In the MAX! Room Solution, all settings of the MAX!
Radiator Thermostat + are made via the MAX! Wall
Thermostat + .
If you use the MAX! Radiator Thermostat + in the
MAX! Radiator Solution, please proceed as follows:
• Press the Auto/Mode button for more than 3 seconds. The
display will show "Pro". Confirm this with the Boost button.
• The display will show "dAy". With the handwheel choose
a single weekday, all weekdays, the weekend or the en-
tire week (example: weekdays).
• Confirm with the Boost button.
• Now set the end time of the first time period (example:
6:00 o'clock for the period 0:00 – 6:00 o'clock).
• Confirm with the Boost button.
• With the handwheel select the chosen temperature for
the previously chosen time period (example: 17.0°C).
• Confirm with the Boost button.
• Repeat this procedure until temperatures are stored for
the entire period between 0:00 and 23:59 o'clock.
In Auto mode, the temperature can be changed via the
handwheel or the comfort/set-back button (
However, the changes will only be maintained until the next
change setting of the week programme.
72
) at any time.