Accessing The Error Memory - Baxi AWHP 22 TR–2 Installation And Service Manual

Code
A02.18
A02.37
A02.54
A10.08
A10.17
A10.26
A10.35
A10.44
A10.45
A10.46
A10.47
A10.50
A10.54
A10.56
11.3

Accessing the error memory

Fig.103
MW-2000369-1
Fig.104
Fig.105
Fig.106
7701563 - v02 - 22052018
Description
Object Dictionary Error:
Reset and
Uncritical device has been disconnected:
Bad connection: check the wiring and connectors.
Faulty SCB PCB: replace SCB PCB
OpenTherm ASK warning
Outside Temperature Zone A missing
Outside Temperature Zone B missing
Outside Temperature Zone C missing
Outside Temperature Zone D missing
Outside Temperature Zone E missing
Measure of Room Temperature Zone A is missing
Measure of Room Temperature Zone B is missing
Measure of Room Temperature Zone C is missing
Domestic hot water temperature sensor top zone D is missing
Domestic hot water temperature sensor zone D is missing
Domestic hot water temperature sensor zone E is missing
The error and fault codes are listed together in the memory.
1. Access the menus by pressing the two keys on the right
simultaneously.
2. Select the Malfunction menu
3. Select the PCB by pressing the
Confirm the PCB selection by pressing the
appears.
4. Go to the error details by pressing the
5. Scroll through the errors by pressing the
opens, the row of the error in the memory appears briefly. The PCB
name appears. Go back to the error list by pressing the
6. Go back to the Er:xxx display by pressing the
key: the CLR parameter flashes after the errors. 000 corresponds to
the PCB selected.
7. Exit the Malfunctions menu by pressing the
Important
The Er:xxx parameter flashes. 000 corresponds to the number of
stored errors.
Important
The errors are stored from the most recent to the oldest.
Clear the error memory by pressing the
11 Troubleshooting
by pressing the key.
or key. The icon appears.
key: the PCB name
key.
or key. When this menu


key. Press the
key.

key.
iHPI
key.
97