Preventive Maintenance - Frymaster Gen III LOV Installation, Operation And Maintenance Manual

BIELA14-T SERIES GEN III LOV™ ELECTRIC FRYER
CHAPTER 6: PREVENTATIVE MAINTENANCE
6.1 Fryer Preventive Maintenance Checks and Service
The crumb tray in fryers equipped with a filter system must be emptied into a fireproof container at the
end of frying operations each day. Some food particles can spontaneously combust if left soaking in certain
shortening material.
Never attempt to clean the fryer during the frying process or when the frypot is filled with hot oil. If water
comes in contact with oil heated to frying temperature, it will cause spattering of the oil, which can result in
severe burns to nearby personnel
Use McDonald's All-Purpose Concentrate. Read the directions for use and precautionary statements before
use. Particular attention must be paid to the concentration of cleaner and the length of time the cleaner
remains on the food contact surfaces.
6.2 DAILY CHECKS AND SERVICE
6.2.1 Inspect Fryer and Accessories for Damage
Look for loose or frayed wires and cords, leaks, foreign material in frypot or inside cabinet, and any other
indications that the fryer and accessories are not ready and safe for operation.
6.2.2 Clean Inside and Outside of the Fryer Cabinet – Daily
Clean inside the fryer cabinet with a dry, clean cloth. Wipe all accessible metal surfaces and components to remove
accumulated oil and dust.
Clean the outside of the fryer cabinet with a clean, damp cloth soaked with McDonald's All-Purpose Concentrate.
Wipe with a clean, damp cloth.
6.2.3 Clean the Built-In Filtration System - Daily
Never use the filter pan to transport old oil to the disposal area.
Never drain water into the filter pan. Water will damage the filter pump.
There are no periodic preventive maintenance checks and services required for your FootPrint Pro Filtration System
other than daily cleaning of the filter pan with a solution of hot water and McDonald's All-Purpose Concentrate.
If you notice that the systems is pumping slowly or not at all, verify that the filter pan screen is on the bottom of the
filter pan, with the pad on top of the screen. Verify that the two O-ring(s) on the fitting at the right front of the filter
pan are present and in good condition.
.
Never operate the filter system without oil in the system.
DANGER
DANGER
WARNING
WARNING
WARNING
WARNING
6–1