Accessing The Web Interface - GeoVision GV-3D People Counter V2 Quick Start Manual

5. Accessing the Web Interface

After installing the GV-3D People Counter V2 on the network, you can access GV-Web Report
Lite to look up counting data. The GV-Web Report Lite is a Web server built in the GV-3D
People Counter V2. By default, when the GV-3D People Counter V2 is installed to a LAN with
the DHCP server, the GV-3D People Counter V2 uses a dynamic IP address assigned by the
server. If installed in a LAN without the DHCP server, the default IP address 192.168.0.10
will be applied.
System Requirements
To access GV-3D People Counter V2 through Web browser, ensure your PC is in good
network connection, and use the following web browser:
Microsoft Internet Explorer 10 or above

Logging In
1. In your Web browser, type the IP address or the domain name of the GV-3D People
Counter V2 in the Location / Address field.
Figure 3-1
1. Select a different Language if needed.
2. Type the ID and password. The default ID and password are admin.
3. Type the characters shown in the image and click Login.
7