Basic Hookup Methods - Sanyo DS13390, DS19390, DS25390 Owner's Manual

QuickTips
The TV will automati-
cally select the correct
Antenna mode for the
type of signal you
connect.
TV will switch off
automatically after 15
minutes if there is no
signal reception (cable
out or station not
broadcasting).
Need help?
Visit our website at
www.sanyoctv.com
or
Call 1-800-877-5032
CATV FRANCHISE NOTE: Cable
companies, like public utilities, are
franchised by local government
authorities. To receive cable pro-
grams, even with equipment
which is capable of receiving cable
channels, the consumer must
subscribe to the cable company's
service.
4

BASIC HOOKUP METHODS

Use one of these methods to connect a signal to your TV. Select 1a—if you have cable
service and a VCR, 1b—if you have a cable box and a VCR, 1c—if you have an outdoor or
indoor antenna and a VCR, or 1d—if you have a satellite dish and a VCR. Connect your
cable or antenna directly to the TV if you don't have any optional accessories.
a
Cable with VCR and TV
b
Cable with Cable Box, VCR, and TV
CABLE BOX
c Outdoor or Indoor Antenna with VCR and TV
+
+
d Satellite Dish with Receiver, VCR, and TV
CH3
CH4
75 OHM Terminal
Use the 75 ohm terminal to
connect a VCR, cable, cable
box, outdoor/indoor antenna
or satellite receiver directly to
the TV.
VCR
IN
FROM ANT.
OUT
OUT TO TV.
VCR
IN
FROM ANT.
OUT
IN OUT
OUT TO TV.
VCR
IN
FROM ANT.
OUT
OUT TO TV.
CATV IN
VIDEO R- AUDIO
OUT TO TV S-VIDEO
VIDEO R- AUDIO
UHF/VHF/CATV
75Ω
TV BACK
UHF/VHF/CATV
75Ω
TV BACK
UHF/VHF/CATV
75Ω
TV BACK
UHF/VHF/CATV
75Ω
VCR
RECEIVER
IN
FROM ANT.
OUT
-L
IN FROM
SAT.
OUT TO TV.
-L
+
TV BACK