Getting Started - Berkeley Varitronics Systems wolfhound pro User Manual

Getting Started
Connect the provided USB cable to the WolfHound Pro and PC.
Turn on the WolfHound Pro receiver.
Start the WolfHound Pro software.
The status window in the upper-right portion of the screen will display messages.
If connected properly, the firmware version and serial number of the unit will appear as messages.
The real-time display of signal strength will begin to appear.
NOTE: The first time the software is run, the user will be requested to enter a registration code. The
registration code is provided along with the software. Type in the registration code to unlock the real-
time feature of the application. The software will not ask for this information again.
Quick Tour
The WolfHound Pro has a tab control menu on the left-hand side of the main screen which separates the
functionality into main sections. These are:
REAL-TIME – Displays information real-time being collected from the WolfHound Pro
STATISTICS – Allows the user to review stored information in a graphical format and to then be able to
print out the information in a report.
The WolfHound Pro also has a menu for Settings and Help along the top edge of the display window.
33