Reset Max Bars - Berkeley Varitronics Systems wolfhound pro User Manual

The Threshold Marker Setting allows the user to set a line anywhere along the scale on the left. Should
the Wolfhound-PRO detect a signal that exceeds that threshold, the user will be alerted with one or
more alerts (see Activating Accessories for information on this). To change the threshold marker,
highlight the T icon and select it. The T icon located near the scale can now be modified up or down
using the trackball or up/down buttons on the keypad (model dependent). Press the trackball or keypad
center pushbutton again to set the desired level.
Reset Max Bars:
Figure 14. Reset Max Bars
The Reset Max Bars mode is activated when the user highlights the spinning wheel icon and selects until
the down arrow icon appears as shown in Figure 14. Once a cell phone is detected and the bar appears,
the markers will move to the maximum level detected and remain there. This mode is helpful when the
user is busy while cell phone activity is occurring. To set the markers to zero, select the down arrow
icon while it is highlighted.
17