UP015DH(CLT5810) ENG OM
CALLER ID
Storing Caller ID messages in memory dialing
Messages (Caller ID names/numbers) shown in the Caller ID list can
be stored in memory dialing.
Note:
You cannot store a Caller ID message if no phone number appears in
the message.
1
Press the CID/MENU key.
Select the phone number to be stored
from the Caller ID list by pressing the
VOL/RING or
2
Press the MEM key.
3
Press the
(0 - 9) to select the memory location to be stored.
4
Press the SELECT key.
You hear a confirmation tone, and the
number is stored in memory. The display
returns to the Caller ID list.
Note:
If a message has already been stored in the selected
memory number location, a confirmation screen
is displayed.
Press the
VOL/RING key to select ¨
overwrite. The display returns to the Caller ID list.
3/9/05
10:38 AM
FEATURES
VOL/RING key.
VOL/RING or
VOL/RING key or enter a number
Yes
¨. Press the SELECT key to
Page 35
E35