Adjusting High Pass Filter Attenuation Slope; Adjusting Source Levels - Pioneer SUPER TUNER III D FH-P4200MP Operation Manual

Audio Adjustments
Adjusting high pass filter
attenuation slope
When the high pass filter is on, you can adjust
the continuity of sound between speaker
units.
1 Press AUDIO to select the slope setting.
Press AUDIO until F-SLP (front high pass filter
slope) or R-SLP (rear high pass filter slope) ap-
pears in the display.
2 Press c or d to select slope.
Press c and 12 is displayed. Press d and 6 is
displayed.

Adjusting source levels

SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
! Settings are based on the FM tuner volume
level, which remains unchanged.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Press AUDIO and hold until SLA ap-
pears in the display.
# When selecting the FM tuner as the source,
you cannot switch to SLA.
3 Press a or b to adjust the source vo-
lume.
Each press of a or b increases or decreases
the source volume.
SLA : +4  SLA : 4 is displayed as the source
volume is increased or decreased.
All manuals and user guides at all-guides.com
Notes
! If you do not operate the SLA function within
about 30 seconds, the display is automatically
returned to the source display.
! The AM tuner volume level can also be ad-
justed with source level adjustments.
! The built-in CD player and the multi-CD player
are set to the same source level adjustment
volume automatically.
! External unit 1 and external unit 2 are set to
the same source level adjustment volume
automatically.
Section
09
37
En