Cassette Player; Playing A Tape - Pioneer SUPER TUNER III D FH-P4200MP Operation Manual

Section
05

Cassette Player

Playing a tape

These are the basic steps necessary to play a
tape with your cassette player. More advanced
cassette player operation is explained starting
on the next page.
1 Tape direction indicator
Shows the direction of the tape transport.
2 Play time indicator
Shows the elapsed playing time of the cur-
rent side of the tape.
1 Insert a cassette tape into the cassette
loading slot.
Playback will automatically start.
Cassette loading slot
# You can eject a cassette tape by pressing
TAPE EJECT.
2 After a cassette tape has been inserted,
press SOURCE to select the cassette player.
Press SOURCE until you see Cassette dis-
played.
3 Use VOLUME to adjust the sound level.
Rotate it to increase or decrease the volume.
14
En
All manuals and user guides at all-guides.com
1 2
4 To perform fast forward or rewind,
press c or d.
FF or REW appears in the display.
# To cancel fast forward or rewind and return to
playback, press BAND.
# You can cancel fast forward or rewind by
pressing c or d in the same direction twice.
5 To perform forward or rewind music
search, press c or d twice.
F-MS (forward music search) or R-MS (rewind
music search) appears in the display. The cas-
sette player will fast forward or rewind to the
next or previous blank spot on the tape and
begin to play.
# To cancel music search and return to play-
back, press BAND.
# You can cancel music search by pressing c or
d in the same direction again.
6 To change the direction of the tape
transport, press BAND.
Notes
! Do not insert anything other than a cassette
tape into the cassette loading slot.
! A cassette left partially inserted after ejection
may incur damage or fall out.
! Play time indicator starts from 0000 in the
following cases:
 When a tape is inserted
 When the tape direction is changed
 When you rewind the tape to the begin-
ning
! Play time indicator is halted when fast for-
ward, rewind or music search is operating.