Controls - Non-Dispenser Models - Frigidaire BASELINE Series Use & Care Manual

CONTROLS - NON-DISPENSER MODELS

User Interface In-Door Controls (options may vary)
IMPORTANT
Pressing the system on/off icon does not turn off power to your
refrigerator. You must unplug the power cord from the wall outlet.
An indicator light will be illuminated above most active features.
Touch the icon to activate the options below.
Power
On Off
Default
Settings
Quick
Freeze
Quick Ice
Air Filter
Water
Filter
Alert
Reset
F/C
Setting cooling temperatures
Press the + or − indicator to adjust the temperature to the desired
setting.
The temperature setting will begin to blink with the first touch. The
display will time out after 10 seconds and return to the basic display.

The recommended settings for a product installed in a kitchen is
37˚F for the fresh food compartment and 0˚F for the freezer.
Press and hold for three seconds to turn off the
cooling system to clean the refrigerator. The digital
displays will read OFF.
Resets all refrigerator settings such as temp, temp
display and tones to their factory default settings.
Activates a faster rate for freezing food.
Temporarily increases cooling for freezer to increase
the production of ice
Filter condition status is always displayed when
door is open. Press and hold for three seconds to
reset after filter change.
Press and hold for three seconds to reset after filter
change.
Tones emitted by each key press can be turned off
based on user preference. The sounds are muted
when the red indicator is lit. Warning signals will
stay active.
Touch to toggle display from Fahrenheit to Celsius.
NOTE
21