Frigidaire BASELINE Series Use & Care Manual page 13

Removing Freezer Drawer
CAUTION
Drawer is heavy. Use caution when lifting.
1 Remove 4 hex head drawer screws.
2 Lift up drawer to remove.
Remove
Hex Head
Drawer Screw
Replacing Freezer Drawer
1 Extend the Freezer slides from the unit.
2 Carefully align support pin with hooks
on end of freezer slides and then lower
freezer door onto slides.
3 Replace the 4 hex head screws that secure
the slides to the door (2 on each side) and
tighten.
Pin
Hook
DOOR REMOVAL INSTRUCTIONS
DO NOT
Remove
Other
Screws

NOTE
To locate the pin, look inside the drawer
and the pin is next to the door liner and
the slides. Not all parts are shown in the
illustration.
DO NOT
Loosen
or
Remove
These 3
Hex
Screws
13