Advertisement
A.
If the MIDDLE SLATS arrive
disassembled, slide the two
MIDDLE SLAT pieces over
the U shaped piece.
B.
Place your MIDDLE SLATS
with the pre-installed bolts
facing up. Adjust the length
of the SLATS to match the
width of the LEGS by
loosening these bolts and
pulling the SLATS apart.
C.
Attach the MIDDLE SLATS to
the LEGS using x4 M6x35
BOLTS for each MIDDLE
SLAT then tighten the bolts
in the middle of both slats.
x8 M6x35
A
B
C
C
STEP FOUR
C
C
DUAL MOTOR ASSEMBLY MANUAL F2-DM-TS
Advertisement
