Advertisement
Lay out all of the parts and
hardware to ensure you have
everything.
Assemble your frame on the
underside of your desk top.
To do this, make sure the top
is laying on a soft surface
such as carpet or towel with
the screw holes facing up.
This will help to avoid
scratching the top's surface.
A.
Position the LEGS so the
end with the motor is flush
with the DESK TOP and the
cords are pointing toward
one another.
B.
The holes on the legs for
the OPTIONAL CROSSBAR
will be facing toward the
back of your desk.
B
holes for
opt. Crossbar
A
DUAL MOTOR ASSEMBLY MANUAL F2-DM-TS
STEP ONE
A
Advertisement
