StandDesk Dual Motor Stand Desk Assembly Manual page 10

OPTIONAL UPGRADE - CABLE
MANAGEMENT TRAY
A. Remove the x2 PRE-INSTALLED
M6x35 BOLTS from the BACK
MIDDLE SLAT.
B. Attach the CABLE MANAGEMENT
TRAY to the BACK MIDDLE SLAT,
making sure the tray is facing the
back of your desk using x4 M6x12
BOLTS and x4 WASHERS to attach.
Then reinstall the x2 M6x35
BOLTS onto the BACK SLAT.
x2 M6x35
x4 Washers
x4 M6x12
A
B
STEP SEVEN
B
DUAL MOTOR ASSEMBLY MANUAL F2-DM-TS