Ecom -D Quick Manual page 4

Analyser Start-Up
Once the instrument is switched on (key <I/0>), the
main menu is displayed.
6 sub-menus with the following functions (non-
visible sub-menus can be viewed with the arrow
keys) are displayed:
- Gas analysis : Perform gas analysis
- Soot...Oil trace
- Data processing : Save measurements / Data transfer
- Adjustments
- Control
To perform measurements, select "Gas analysis" with the arrow keys
and confirm with <Enter>. The instrument starts then a 1- minute au-
to-zero phase and the fuel type selection list is displayed. The follow-
ing fuel types are available:
ecom-D
Always position the probe in the exhaust pipe
once the auto-zero phase is over!
Always use a filtering system as per our rec-
ommendation for combustion plants
firing solid combustibles!
: Input of soot measurement results
(Multi-media card required)
: Modify instrument settings
: Check operation state of instrument
Page 4
Gas analysis
Soot..Oil trace
Data processing
Adjustments
Control