weinor BiEasy 15M Go! Operating Instructions Manual page 83

6 Troubleshooting
Fault
Drive not running,
status display
does not light up
Drive not running,
status display
flashes red or
orange
Desired drive
does not run
End positions
are approached
inaccurately
Drive runs in the
wrong direction
Tab. 12 Troubleshooting for the BiEasy 15M Go!
Cause
Batteries are
depleted
Batteries are
incorrectly
installed
1. The receiver is
outside radio
range.
2. Receiver not
operating or
faulty
3. Receiver not yet
programmed
Incorrect channel
selected
End positions not
yet set
Directions
are incorrectly
allocated
Ⓒ weinor GmbH & Co. KG
Remedy
Insert new
batteries
Insert batteries
correctly
1. Reduce
distance to
the receiver
2. Switch on
or replace
receiver
3. Program
receiver
Select correct
channel
Have the end
positions set by
a specialist in
accordance
with the product
instructions
Delete transmitter
and reprogram
EN | 83