weinor BiEasy 15M Go! Operating Instructions Manual page 67

4.4.2 Status LED
A radio signal is indicated by the status display (LED ring
around the STOP button) lighting up.
The status LED can display different colours:
Status display (status LED) and its significance
flashing orange
quick flashing orange
orange then green
orange then flashing red
orange, alternating 2x,
then red
Tab. 8 Status display and its significance
The transmitting power or the radio range will be reduced
through the reduction in the performance of the battery
(decrease in capacity). If the status LED no longer illumi-
nates upon pressing the button, the batteries have to be
replaced (see Section 4.7, Changing the batteries).
Ⓒ weinor GmbH & Co. KG
Channel not yet programmed
in any receiver
Channel in programming
mode, operation of already
programmed receivers not
possible. In group program-
ming mode, permanent
illumination every 3 seconds
Receiver has received and
responded to the signal sent
by the radio transmitter
Receiver has not received
the signal sent by the radio
transmitter
Channels in receiver and
radio transmitter deleted
EN | 67