Power Supply; Operating Mode - weinor BiEasy 15M Go! Operating Instructions Manual

4.3

Power supply

The device is powered by two LR6 batteries (not rechargeable
batteries). Make sure to use two identical 1.5 V rated voltage
batteries. When the batteries are depleted, the device will
switch off automatically. Weak batteries are indicated on the
battery indicator in the top area of the display (toolbar) next to
the channel number display.
Important:
When changing the batteries:
see Section 4.7, Changing the batteries.
4.4

Operating mode

When the device is ready for operation, it will be found in
the display channel display.
When the buttons and/or joystick have not been engaged
for more than 2 minutes, the display will be switched off.
After the programming process for the transmitter channel
to a receiver is complete, a product-specific icon is dis-
played in operating mode with a predefined text field. The
display contains the icons as described in Section 4.4.1.
The symbols for the driving status and the automatic or
manual operation of the receiver can be found to the right
of the assigned product icon.
At the bottom line of the display, the two soft key buttons
display the available functions depending on the corre-
sponding operating state.
62 | EN
Ⓒ weinor GmbH & Co. KG