weinor BiEasy 15M Go! Operating Instructions Manual page 68

4.4.3 Central channel ("All")
The central channel is the motor control unit for all the
motor receivers (single channels) at the same time.
The central channel (channel 16) is shown in the display
as "1 ... 15".
4.4.4 Joystick (multi-way button)
The joystick (4-way button) is used to adjust the colour in
a programmed RGB light receiver. In addition, it is also the
central control device for navigating the on-screen menus.
4.4.5 Selection button
By briefly pressing the selection button, you can query the
current automatic status and the receiver position of the
programmed receiver and update it on the radio transmitter.
By pressing the selection button (longer than 1 second),
you can switch the operating mode of the corresponding
channel (between "Auto" and "Manual").
"Manual" operating mode:
The operating mode display lights up in red and the operat-
ing mode changes from "automatic" to "manual" mode in the
display.
• The receiver now carries out manual travel commands
only and does not respond to automatic travel commands.
68 | EN
Ⓒ weinor GmbH & Co. KG