weinor BiEasy 15M Go! Operating Instructions Manual page 74

4.5.6 Menu version
Indication of the current firmware version
4.5.7 Expert menu
The expert menu is not usually activated. It can be activated
by pressing and holding down the following key combination
in the dialogue box of the menu version:
first <soft key button left> + then <soft key button right>.
The expert menu is accessible via the menu structure until
the display shuts off (2 minutes without button operation).
"All on/off"
In the factory settings, the central channel is available:
"All on".
If this is not desired or does not make sense (e.g., when
operating both shutters and awnings) this function can be
deactivated by pushing "All off".
Selecting the "All off" setting deactivates the control options
for the central channel.
"INFO on/off"
The On or off function for the cyclic polling of the individual
channels at the start and during the travel movement for
the central channel. Depending on the individual channels
in the central channel, the cut-out can significantly reduce
radio traffic during transmission. In the case of a cut-out,
the position indicator is updated by the transmitter's internal
runtime.
74 | EN
Ⓒ weinor GmbH & Co. KG