Table of Contents
Advertisement
CiM Quick Start Guide
Operation
4
Set AccessClient2
a
b
Now PC 2 (and any other device on network 172.17.10.0/24) will be able to ping CiM 1
or access CiM 1 via Telnet or FTP or web interface.
1.9.2.2 C
M 2 C
I
ONFIGURATION
Step
Description
1
From the Main Menu select Administration sub-menu.
2
From the Administration menu, select Access Lists sub-menu
3
Set AccessClient1
a
b
c
Now CiM 2 can only be pinged from PC 1 (and any other device on network
172.16.10.0/24) or accessed via Telnet or FTP or web interface. PC 2 will not be able to
ping CiM 2 or access via any other means. To allow PC 2 access to CiM 2:
3
Set AccessClient2
a
b
Now PC 2 (and any other device on network 172.17.10.0/24) will be able to ping CiM 2
or access CiM 2 via Telnet or FTP or web interface.
Set IP Address to 172.17.10.0
Number of subnet bits to 24
Set IP Address to 172.16.10.0
Set Number of subnet bits to 24
Set Access List Enforcement to Enabled
Set IP Address to 172.17.10.0
Set Number of subnet bits to 24
12
Rev. 1
CD/CIMQSTART.IOM
Advertisement
Table of Contents
Need help?
Do you have a question about the CiM Series and is the answer not in the manual?
Questions and answers