Leveling/Adjustments/Alignment - Viking Range 5 Series Installation Manual

Electrical Connection (4-wire)
7
1 1
Push supply cord toward terminal block
to relieve strain, reattach supply cord strain relief
bracket over supply cord.

Leveling/Adjustments/Alignment

1
Measure the four corners in cutout area to
verify if flooring is level.
4
Check that unit is level side to
side and front to back. Side trim of the high corner
must be 3/8" (0.95 cm) above countertop.
8
Reattach access door.
2
Move unit into opening.
5
" " "
3 / 8 3 / 8 3 / 8
) ) )
c m c m c m
9 5 9 5 9 5
( 0 . ( 0 . ( 0 .
If leveling is required, move unit out of
opening.
13
3
For uneven or sloped floors, level unit with
metal shims only, as the adjustment required
may exceed the thread available in the leg.
6
1
1
Lift unit and prop on wood blocks.