Table of Contents
Advertisement
Racewell HD
SETTING UP THE SHEEP HANDLER
All components on the system clip together with drop locks, like on the tailboards of utes
This makes for an end unit that is stable and firmly connected but is easy to dismantle
should you need to move your system to another set of yards
Place the 'Leadup Race Section' in position at the end of the race that
1
the sheep will feed from
Now connect the 'Pedal Section' to the front of the race and join the
2
two together
3
Place the 'Base and Sheep Unit' in front and join to the pedal section You may
want to pin the base to the ground Some farmers find placing a sheet of ply
under the base provides a good surface and makes tidying up wool pieces
easy at the end of the day This is optional
The moving 'Crush Wall' can now be mounted Do so by placing the fixed end
4
to the rear of the crush in one of the holes provided Use the spring pin at the
front of the wall to position the wall in the corresponding hole at the front
Take the green ram, and mount it to the back of the wall
- we suggest the centre hole Bolt to the base with the bolt provided
WARNING: Adjust this pin so the wall cannot touch the opposite side
This is a safety feature so that hands and fingers cannot be caught in the
empty unit accidentally
One 10mm airline goes in the bottom, the black 6mm airline in the top
Be sure they are pushed in firmly
ENTRY ACCESS DOORS
The entry access doors can now be fitted These simply hook onto the hinges at the front
of the leadup race The flat door goes on the far side
Note: It can be adjusted on the floor of the pedal section to provide variable entry size
depending on the animals being dealt with The auto gate fits on the working side
Te Pari - www.tepari.com - FREEPHONE 0800 837 274
SHEEP HANDLING SYSTEMS
5
HD3 Sheep Handler Installation Manual
1214-V1
Hide quick links:
Advertisement
Table of Contents
